Meanwell MPQ 200D electrical equipment supplies with pfc

Meanwell MPQ 200D Electrical Equipment Supplies
  • Seller Hangzhou Kulon Electronics Co., Ltd.
  • Min. Order 1 Piece/Pieces sample is ok for testing
  • FOB Price US $53-64 /Piece

Item Details

Port: any sea port of china
Supply Ability: 50000 Piece/Pieces per Month enough stocks for power supply
Payment Terms: L/C,T/T,Western Union,MoneyGram,Paypal

Product Description

Welcome to Kulon Family

Meanwell MPQ-200D electrical equipment supplies with pfc

Main Features

♦ Universal AC input / Full range
♦ Low leakage current <250μA
♦ Protections: Short circuit / Overload / Over voltage

♦ Cooling by free air convection

♦ Medical safety approved (2 x MOPP between primary to secondary)
♦ 100% full load burn-in test
♦ Fixed switching frequency at 45KHz

♦ 3 years warranty

Specifications

♦ power supply 5v

♦ Protections: SC / OL / OV
♦ CB CE TUV CUL
♦ Fast Delivery High Quality
♦ 3 years warranty

Product Specification

MODEL MPQ-200D
OUTPUT OUTPUT NUMBER CH1
DC VOLTAGE -12V
CURRENT RANGE 2.4A
RATED POWER 195W
OUTPUT POWER (max.) 52W with 18CFM min. Forced air convection
RIPPLE & NOISE (max.) Note.2 60mVp-p
VOLTAGE ADJ. RANGE CH1:4.5 ~ 5.5V
VOLTAGE TOLERANCE Note.3 ±4.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±3.0%
SETUP, RISE TIME 800ms, 20ms/230VAC 800ms, 20ms/115VAC at full load
HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load
INPUT VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE 47 ~ 440Hz
EFFICIENCY(Typ.) 79%
AC CURRENT (Typ.) 1.2A/115VAC 0.7A/230VAC
INRUSH CURRENT (Typ.) COLD START 15A/115VAC 30A/230VAC
LEAKAGE CURRENT <0.3mA / 264VAC
PROTECTION OVERLOAD 53 ~ 75W rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.75 ~ 6.75V on CH1
Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT WORKING TEMP. -20 ~ +70°C (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT ±0.04%/°C (0 ~ 50°C ) on +5V output
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4) SAFETY STANDARDS UL2601-1, TUV EN60601-1, IEC60601-1 approved
WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN60601-1-2, medical level, criteria A
OTHERS MTBF 291.3Khrs min. MIL-HDBK-217F (25°C )
NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on )
5. Mounting holes M1 and M2 should be grounded for EMI purposes.
6. Heat Sink HS1,HS2 can not be shorted.
7. Touch current was measured from primary input to DC output.

Shipping

Our Company

More Product

Packing

Why Choose Us

Waiting for your kind inquiry !

Recommended Products